:: [MXKEY - TIPS] Yang harus diketahui tentang MXKEY ::

[Gallery Team]

:: [MXKEY - TIPS] Yang harus diketahui tentang MXKEY ::

Just copas and translate
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


* 1. Pastikan memilih Platform yg benar (DCT4 atau BB5) sebelum memulai.

* 2. Gunakan "Scan" untuk menangani ponsel yg tidak mati, hal ini membantu mobileEx dalam menentukan setting spesifik yg benar untuk ponsel yg dihubngkan dengan box.

* 3. "BUS Check" dengan setting safe flash dicentang, akan perform boot squence, menampilkan informa booting (upp id, flash manufacture, flash address) dan otomatis mem-backup rpl.

* 4. Pastikan ponsel dalam keadaan mode yg benar dalam menjalankan operasional FBUS/NON flashing,
- contoh: pada jendela Tuning & Testing, ponselharusnya dalam TEST MODE, selain itu akan lebih baik jika ponsel dalam keadaan LOCAL MODE.
Pindah mode secara manual jika dibutuhkan.

* 5. Saat mengerjakan ponsel dalam kondisi hidup, untuk semua perbaikan (ganti bahasa, Unlock dsb), DCT4 and BB5, akan lebih baik untuk selalu mem-backup security data (RPL, certificate, pm, dsb) sebelum melakukan repair.

* 6. Jika anda perhatikan, ada perbedaan dari speed flashing antara FlashID/Manufacturer dimana pilihan 'Fast flash' seharus tidak berlaku untuk chip flash "INTEL".

* 7. Jika hanya mengganti bahasa, pilih file setting ke NORMAL. dan centang 'Language Only"

* 8. "Safe Flash" akan mem-backup RPL dari flash mode, dan saat ini TIDAK support untuk ponsel dengan ASIC type 11, JANGAN centang. Untuk ponsel ini, lakukan backup PM selama backup RPL dari flash mode belum support. Semea DCT4 selain itu telah support. Yup, walaupun ponsel mati.

* 9. Gunakan tombol "Restart" jika hendak me-refresh koneksi atau restart ponsel dan software.

* 10. Unlock "Security Code" pada semua DCT4,DCT4PLUS(Asic 2),WD2, TIKU tanpa kehilangan user data(phonebook, msg, dsb) meskipun counter sudah di block? Yup, sangat mungkin dengan mobileEx. Hanya klik "BUS Check" dan akan tampil "Master Code" , gunakan code sebagai security code(code ini dibaca dariponsel dan 100% berfungsi untuk CDMA atau GSM).


-----------------------
Setting Software
-----------------------
Configurasi Nokia Tool

Buka Nokia Service Tool, dan klik di pojok sini

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.



To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


* Enabled Imei changes -> jika dicentang Imei/Esn changes akan berfungsi.
sebaik cek hukum yg berlaku ditempat anda.

* Auto backup ... -> Backup RPL saat BUS check (DCT4)

* Auto Create DP folder if not exist
Ini untuk membuat direktori untuk .nfp extract. Dalam folder ini kan berisi mcu, ppm, and cnt.

* Default FBUS timeout
Ini akan mengatur FBUS timeout (value lebih tinggi = lebih lambat tapi lebih akurat)

* Highlight market item
Akan menunjukan market yg dipilih. Contoh gambar, menunjukkan Indo, APAC, MD, and -X.
Akan terlihat seperti ini saat memlih file berdasarkan product code

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Server : ini tool untuk kalkulasi ask ke rpl. Pilih salah satu yg paling cepat dari lokasi anda.


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Setiing untuk lokasi direktori firmware default


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Semoga Bermanfaat........

[Gallery Team]

Dibeberapa PC atau PC dengan OS baru
setelah membuka software utama MXKEY tidak dapat tampil untuk beberapa saat.

kemungkinan karena smartcard reader konflk atau not signed

coba instal lagi driver ini

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


---------- Post added at 18:15 ---------- Previous post was at 18:13 ----------

Menggunakan SAFE Erase

Sejak v3.2 revision 5.0, Public-Release
Telah di release feature baru bagian dari tool Erase Flash .Code:
...............
~ SAFE Erase will Protect PM Data from erase specially when doing 'Erase WHOLE flash'.
~ Usefull for recovering a DEAD phone without loosing SIMLOCK DATA
dinamakan -> SAFE Erase.
Artinya Erase Flash area "TANPA" menghapus PM Data Area ( include Simlock ).

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Contoh:
kasus 5300 RM-146 yg dapat local mode
pertama backup RPL dan PM

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Jika tidak dapat local mode, dengan cara ini, kita dapat mem-backup RAP NPC ( dengan memiih RAP )
langkah ini tidak membutuhkan local mode.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Lakukan Erase Flash.
Jangan lupa centang Safe Erase Flash ..

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Setelah proses erase selesai, buka tab flashing .
flash dengan firmware yg sesuai.

Ini info ponsel setelah proses flashing ..
jika sebelumnya ponsel tidak mengalami kerusakan, maka ponsel akan normal.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


tinggal restore RPL/RAP NPC RPL backup diatas..
Write PM yg area 308 telah diremove dengan SX4

---------- Post added at 18:16 ---------- Previous post was at 18:15 ----------

sync time with server
salah satu penyebab sign error

langkah singkronisasi watu dengan server.

- klik 2x time/date di PC

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


- Pilih Time Zone yg sesuai dengan negara anda

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


- centang auto sync dan "Update NOW"

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


lakukan sign app
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
.[COLOR="Silver"]

---------- Post added at 18:31 ---------- Previous post was at 18:16 ----------

download Firmware dari "IMAGE DL" button

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


- Masukkan secara manual product code
- Klik "IMAGE DL"
- Setelah tampil jendela baru( image to download ) ,klik "download"

---------- Post added at 19:17 ---------- Previous post was at 18:31 ----------

Langkah Unlock BB5 SL2

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Sebelum unlock, lakukan ful backup RPL dan PM
minimal Backup IMEI + PM308
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[Gallery Team]

Tips cara flashing beberapa ponsel dengan MXKEY

Contoh boot check dengan UFSxHWK.


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Dan ini saat di BUS Check menggunakan mobileEx dengan versi 3.3


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Coba dengan memilih flash loader jika mengalami masalh sepeti ini.
Hal ini juga berlaku untuk kasus DCT4 "BootLoader not responding, mostly RAM problem !"


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.



To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Nay...nay..nay.. Ponsel ini tidak support untuk flashing dengan F-Bus interface.


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Seperti yg terbaca di mobileEx, interface yg dipake tidak didukung, maka harus menggunakan Nokia USB ROM.
Dan proses berlangsung sukses tanpa masalah.

Code:
Flashing completed in 4 min 28.672 s


Phone Type:
SW Version:
Imei plain: -
Language Pack:
- not available.



Total time to process is 4 min 55.312 s
USB Pooling failed, phone not found !
Abaikan peringantan pesan error di akhir proses, tidak ada masalah berarti.

Interface F-Bus dapat digunakan untuk proses repair software yg lain.
Seperti Reset, Format, write PM, dsb.


Code:
Phone Type: RM-504 (Nokia 5530 XpressMusic)
SW Version: V ICPR72_09w36.5 25-09-09 RM-504 (c) Nokia
Imei plain: 35420003703310-5
Product Code: 0578167
ApeCoreSw: V 20.0.080
Language Pack:
- not available.

This phone have PM308 protected, SD security in not restorable.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

TimeStamp: 2009-12-07T11:08:23+00:00
SW Version: 20.0.080
Variant Version: 001
ProductProfile: RM504_0578167_20.0.080_001.spr
Simlock: simlock_3gstandard_bb5.bin

Imei net: 354200037033105
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
Reset:
Code:
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 4.109 s
Format:
Code:
Formating FS: C ...
Completed in 0.172 s
Formating FS: D ...
Completed in 0.203 s
Formating FS: E ...
Completed in 1.453 s
Formating FS: Z ...
Completed in 0.203 s


---------- Post added at 19:57 ---------- Previous post was at 19:46 ----------

Repair SUPERDONGLE

phone info

Code:
Phone Type: RM-303 (Nokia 5310 XpressMusic)
SW Version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: andra
Product Code: 0558573
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: andra
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
repair SUPERDONGLE


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Code:
Product: V 10.10 23-03-09 RM-303 (c) Nokia

SYSTEM ASIC ID: 000000010000022600010006010C192101013000
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
Sending SecondaryBoot ...OK
Sending PreLoader ...OK
Sending CustomLoader ...OK

Calculating SUPERDONGLE using security server ...
Connecting to server[main.mxkey.biz] ...OK, secure login ...
Completed in 9.484 s

RPL saved to "C:\mobileEx\3.3\data\backup\BB5_RM-303_andra_SD.RPL"
Updating SUPERDONGLE_KEY ...OK
scan

Code:
Phone Type: RM-303 (Nokia 5310 XpressMusic)
SW Version: V 10.10 23-03-09 RM-303 (c) Nokia
Imei plain: andra
Product Code: 0558573
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: andra
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF

DO "SUPER SD AUTH"


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.


Code:
Product: V 10.10 23-03-09 RM-303 (c) Nokia

SYSTEM ASIC ID: 000000010000022600010006010C192101013000
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 273F6D55DFAAF68F
Sending SecondaryBoot ...OK
Sending PreLoader ...OK
Sending CustomLoader ...OK

Restarting phone ...
Connecting to server[main.mxkey.biz] ...OK, secure login ...
Authenticating to SUPERDONGLE using security server ...
SUPERDONGLE authorized
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
!
write full PM yg area 308 telah dibuang

Code:
Writing PM from Node ...
Section: 1
- Key: 0, size 12 bytes written.
- Key: 2, size 70 bytes written.
- Key: 3, size 70 bytes written.
- Key: 4, size 70 bytes written.
- Key: 6, size 276 bytes written.
- Key: 7, size 276 bytes written.
- Key: 8, size 276 bytes written.
- Key: 10, size 384 bytes written.
- Key: 11, size 384 bytes written.
- Key: 12, size 384 bytes written.
- Key: 14, size 384 bytes written.
- Key: 15, size 384 bytes written.
- Key: 16, size 384 bytes written.
- Key: 17, size 32 bytes written.
- Key: 19, size 16 bytes written.
....
....
kepanjangan..
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

....
....
Section: 365
- Key: 0, size 2 bytes written.
- Key: 1, size 12 bytes written.
- Key: 2, size 36 bytes written.
- Key: 3, size 36 bytes written.
- Key: 4, size 36 bytes written.
- Key: 5, size 36 bytes written.
- Key: 6, size 36 bytes written.
- Key: 7, size 40 bytes written.
- Key: 8, size 40 bytes written.
- Key: 9, size 40 bytes written.
- Key: 10, size 40 bytes written.
- Key: 11, size 40 bytes written.
- Key: 12, size 40 bytes written.
- Key: 13, size 40 bytes written.
- Key: 14, size 40 bytes written.
Completed in 58.796 s


---------- Post added at 20:03 ---------- Previous post was at 19:57 ----------

PM auth dan SUPER SD Auth

PM auth
fungsinya untuk menulis pm 1 dan 309 (melalui otorisasi dari sx4 card)
pada saat tombol ini di tekan sx4 card akan memeriksa npc data(IMEI) dan superdongle data
jika keduanya masih asli dari nokia dan keduanya sinkron maka kita dapat menulis pm 1 dan 309
tentunya setelah sx4 card memeriksa SD dan NPCnyaz(IMEI)


SUPER SD Auth
fungsinya juga untuk menulis pm 1 dan 309
perbedaan dengan pmAuth, tombol ini digunakan untuk menulis pm1 dan 309 setelah kita melakukan repair SD
tapi yg perlu di ketahui bahwa SD yg di tuliskan bukanlah SD asli dari nokia yang kita kenal dlm ask2rpl
tapi merupakan custom dari coder dgn hasil yg sangat memuaskan bagi kita para tekhnisi
jadi setiap kita habis merepair SD lalu kita coba pm Auth hasilnya pasti superdongle error mengapa? (jawabannya diatas)
SUPER SD Auth juga bisa di gunakan utk HP dengan Original SD atau SD habis di repair oleh tool lain, kecuali di HP SL3, karena itu namanya pake 'SUPER".


dengan penjelasan yang masih banyak kurangnya di atas
semoga dapat membantu teman2 semua dalam merepair SD
soalnya banyak yang tanya mengapa setelah repair sd, security failed tekan pm Auth hasilnya sd error...???
jawabannya : karena yg harusnya ditekan SUPER SD Auth bukan PM Auth adapun klo error juga
saran saya.. cek koneksi anda apa sudah cukup bagus hehe...

thanx to faiz..........

[DIEDIET]

okelah kalo begitu

[steloni]

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
T OP LENGKAP BANGET NICH BOS !!!

[sahabatcell]

thank bos sangat membantu saya!!!!

[SUBAGIO KADEK]

Top banget boz,thank"s ilmunya

[W@hyudin]

Informasi yang sangat membatu sekali.............
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
..............
Baravo
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[WEWE2]

THANK,S MASTER Pencerahannya.......

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

[i-box]

Tepat jelas dan manteb tenan.Thank ya Bos